GD300 series high performance open loop vector control VFD
Goodrive300 VFDs are high performance open loop vector VFDs for controlling asynchronous AC induction motors and permanent magnet synchronous motors. Applying the most advanced sensorless vector control which keeps pace with the leading international level and 32-bit DSP system, the product enhances its reliability to meet the requirements of environment adaptability, customized and industrialized design with more optimized functions, more flexible applications and more stable performance.
3 Phase Drives, 380V
For fastest support. Please Call 1800 6567 (Free)
- Free delivery within Ha Noi, Ho Chi Minh, Can Tho
- Free installation
Brand: INVT | Warranty: 24 Months |
Function description |
Specification | |
Capacity range | 1.5KW~630KW | |
Input | Input voltage (V) | +AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V +AC 3PH 380V(-10%)~550V(+10%) Rated voltage: 500V +AC 3PH 520V(-15%)~690V(+10%) Rated voltage: 660V |
Input frequency (Hz) | 47~63Hz | |
Output | Output voltage (V) | 0~input voltage |
Output frequency (Hz) | 0~400Hz | |
Motor type | Asynchronous motor, permanent magnet synchronous motor | |
Controller properties | Starting torque | Asynchronous motor: 0.25Hz/150% (SVC)
Synchronous motor: 2.5Hz/150% (SVC) |
Control mode | SVPWM, SVC | |
Speed ratio | Asynchronous motor 1:200 (SVC), permanent magnet synchronous motor 1:20 (SVC) | |
Overload capacity | 60s for 150% rated current; 10s for 180% of rated current; 1s for 200% of rated current | |
Speed control precision | ± 0.2% (SVC), speed fluctuations ± 0.3% (SVC) Torque response < 20ms (SVC) Torque control precision 10% (SVC). |
|
Frequency setup mode | Digital, analog, pulse frequency, multi-step speed operation, simple PLC, PID, MODBUS communication, PROFIBUS communicaiton, can realize switching between the set combination and the set channel | |
Speed tracking restart | Realize impact-free smooth startup of the rotating motor | |
Filter | C2, C3 | |
Brake set | Integrated voltage brakes 380V (≤30Kw). | |
Communication | Modbus RTU, Profibus, Canbus, Ethernet. | |
Peripheral interface | Digital input | 8 ON – OFF inputs, reversing the status of NO or NC. |
Pulse input | 1 high frequency pulse receiving input, support both PNP and NPN. | |
Analog Input | Two (AI1, AI2) 0~10V/0~20mA, one (AI3)-10~10V | |
Analog Output | Two (AO1, AO2) 0~10V /0~20mA | |
Relay output | Two programmable relay outputs:
-RO1A NO, RO1B NC, RO1C common port -RO2A NO, RO2B NC, RO2C common port |
|
Open collector output | HDO (ON – OFF output or high frequency pulse output) and 1 open collector output. | |
Protection function | Provides over 30 protection codes when problems such as over current, high voltage, under voltage, overheating, phase loss, phase difference, output line breakage, overload etc. Protection level: IP20 |
|
Special functions | Self-voltage stabilization function (AVR) | Automatically stabilizes the output voltage when the supply voltage fluctuates abnormally. |
Power saving function | The function automatically saves electricity when the engine is overloaded Increase engine power factor. |
|
Functions dedicated to the yarn and textile industry | The cycling speed control changes to the reel. | |
Function timer, counter | Integrated timer and counter timer to suit different applications .. | |
Load balancing function | When multiple motors are pulling the same load, this function helps balance the distributed load across the motors by reducing the speed down based on the increased value of the load. | |
Moment compensation function | Increases the torque characteristic of V / F control when the motor works at low speed. | |
Control function brake | Brakes kinetic energy, wins on excitation, wins DC | |
Functions help the system to operate continuously | Automatically reset the error according to preset times and times Maintains operation during transient power outages and wide operating voltage range suitable for flickering power locations. |
|
Load balancing function | When multiple motors are pulling the same load, this function helps balance the distributed load across the motors by reducing the speed down based on the increased value of the load. | |
Function of inspection and supervision | Connect a computer to monitor the operation as well as set parameters for the inverter thanks to software INVT studio V1.0, HCM. | |
10.000+
Customers Nationwide
15+
Year Of Experiences
3000+
Warehouse Area Above 3000 m² Is Always Available Items That Help Customers Fast Project Progress
24h
24 Hours To Complete All Processes, Procedure Is Quick And Flexible
- Compatible with synchronous and asynchronous motors
- Up to 0.25Hz/150% starting torque(Asnychronous motor); 2.5Hz/150% starting torque (Synchronous motor)
- Built-in braking unit
(1.5~30kW, 400V)
(≤18.5kW, 500V)
(≤18.5kW, 500V)
- External LED keypad to copy parameters; Optional LCD keypad provided
- Standard C3 filters; Optional C2 filters
- Standard Modbus, optional Profibus,
Can open and ethernet
Customization products provided: GD310( UL/cUL )
Applications:
Permanent Magnet Synchronous Motor, Mine, Machine Tools, Textile, Oil, Other Machineries”
Customization products provided: GD310( UL/cUL )
Applications:
Permanent Magnet Synchronous Motor, Mine, Machine Tools, Textile, Oil, Other Machineries”