DA180 – New Generation AC Servo System

DA180 is INVT’s new generation (0.1 – 1kW) multi-function multi-function servo product, used for simple and flexible applications. With special features and diverse, high-speed communications, the DA180 provides a wide range of efficient, competitive solutions that fully meet the requirements of intelligent control and high performance.
Request a quote
For fastest support. Please Call 1800 6567 (Free)
  • Free delivery within Ha Noi, Ho Chi Minh, Can Tho
  • Free installation
Brand: INVT Warranty: 18 months
Servo DA180 (100W-1000W)
Power supply Input power supply 220V 1P/3P AC220V(-15%)–240V(+10%)   47Hz–63Hz
Display Control signals Input 10 inputs (function can be configured by parameter setting)
Output 4 outputs (function can be configured by parameter setting)
Analog signal Input 2 input 12 bit
Pulse signal Input 1 group (modes: collector pulse or differential pulse)
Output 1 group (differential pulse, A +, A-, B +, B-, Z +, Z-)
Communication USB 1: 1 communication with PC software (standard)
RS485 1: n RS485 communication (standard)
CANopen 1: n communication CANopen (standard)
Controller mode
  1. Position control
  2. Speed ​​control
  3. Torque control
  4. Position / Speed ​​switching mode
  5. Speed ​​/ Torque switching mode
  6. Position / Torque switching mode
  7. CANopen mode
Function Position control Control input
  1. Delete pulse
  2. Disable pulse input
  3. Convert electronic gear ratios
  4. Vibration control switch
Control output Output position complete …
Pulse input maximum frequency Optical input: 4Mpps differential pulse input, 200kpps collector pulse input
Pulse input mode
  1. Pulse and direction
  2. CW+CCW
  3. Quadrature
Electronic gearbox 1/10000-1000 times
Filter
  1. Filter command controls
  2. FIR filters
Analog input Input torque limit command: torque limit can be executed independently clockwise / counterclockwise
Vibration control Terminal vibration can be controlled and 5-200Hz overall vibration
Pulse output
  1. The pulse frequency division can be set according to the encoder encoder resolution
  2. Phase reversal function B
Speed ​​control Analog input Speed ​​input command Can be controlled by analog input after setting based on analog voltage DC ± 10V
Limit input torque Can be independently arranged clockwise/counterclockwise.
Internal speed control command 8 speed steps can be set according to digital input control
Adjust the ACC / DEC of the internal speed command Set acceleration / deceleration time and set S-curve
Set zero speed In speed mode, it is possible to set to act as speed mode and position mode
Speed ​​command filters A delay filter of the speed analog input
Zero drift speed command Zero deviation control against external noise
Torque control Control input Input reaches zero speed
Control output Reach speed
Analog input Torque input command Analog torque command input, gain and polarity can be set based on analog voltage
Speed ​​limit input Analog speed limit
Speed ​​limit Set speed limit by parameter
Torque setting filters An analog input torque delay filter
The torque command floats zero Zero deviation control against external noise
Internal location Input Internal position 128 bits, position can be set via communication
Install the property 1. Position
2. Speed
3. ACC time
4. DEC time
5. Dwell time
6. Output status
7. Operation mode
Original mode 1. LS signal
2. Z phase signal
3. LS signal + Z phase signal
4. Torque limit signal signal
Protect Hardware protection Over voltage, low voltage, over current, over speed, overload, brake resistor overload, over temperature, encoder error …
Protection and error history 1. Record up to 10 errors.
2. Main parameters can be logged when an error occurs
Environment Operating temperature 0 – 45℃
Storage temperature -20 – 80℃(no freezing)
Operating / storage humidity ≤90%RH (no dew condensation)
IP protection level IP20
Height Below 1000m above sea level
Vibration ≤5.88m / s2, 10 – 60Hz (not allowed to work at resonance)

10.000+

Customers Nationwide

15+

Year Of Experiences

3000+

Warehouse Area Above 3000 m² Is Always Available Items That Help Customers Fast Project Progress

24h

24 Hours To Complete All Processes, Procedure Is Quick And Flexible
– High speed response (up to 2.0kHz).
– Internal position control mode with 128 steps of internal position coordinated with terminal input signal (extended I / O or bus).
– Light and convenient (45% lighter than the DA200).
– High precision with 17bit absolute encoder.
– Diverse communication standards: Modbus, CANopen …
– Adaptability to the environment: natural cooling with capacity from 400W or less.
Low vibration frequency control: eliminates mechanical resonance between low frequencies and mechanical vibrations to increase efficiency in operation.
The DA180 system is widely used in industry, especially medical mask making machines and some machinery in the steel industry such as automatic wire mesh welding machines, capsule breakers, aluminum bar grating machines, plasma cutting machines, machines CNC. In addition, DA180 is also used in the food processing industry such as the application of measuring the length of the packaging machine, controlling the valve in the filling system …
Servo controller has been used and appreciated by customers for many years thanks to its outstanding control feature with high accuracy, engine protection, helping customers to save production costs, lower production costs. products, improving competitiveness in the market.
When using the servo motor, you will receive professional technical service from DAT’s distribution system nationwide, receive technical advice, design, installation, manuals and technical documents free of charge. fee.

REQUEST A QUOTE

Product relate

Dattech

SV – DA200 – Servo Drives

Dattech

DA180 – New Generation AC Servo System

Dattech

MH800 High Performance Hydraulic Servo Drivers

Viewed products

Dattech

DA180 – New Generation AC Servo System